by cprailfan » Mon Aug 15, 2011 5:39 am
To make the 6 wheels make it around my tight curves I took every car to the bench and sometimes had to remove some plastic centre beams that restrict the boogie from rotating far enough... Also check width of the wheels with the gauge... Try running the cars around the curve with the centre set of wheels removed and see if this solves the problem... If it does then some car boogie adjustment is in order... Also I used longer coupler shafts to allow for the cars to work together better... This doesn't look so great if your running passenger cars but at least they run around the tight curves...
Good Luck!